Air Cooled Hood Ventilation System- 4-step Easy Installation!


Even if you are not a professional chef, it’s important to understand the basics of air cooled hood ventilation. This step-by-step guide will teach you how to quickly and easily install your own system!
Topics: Blockchain Game Technology & Development – The future’s coming!, A Case Study in Gaming Evolution

The “air cooled hood setup” is a 4-step process that allows users to install an air cooled hood ventilation system. The process includes the following steps: 1) find out where your vents are, 2) connect the fan and ducts, 3) add insulation, and 4) seal up the vent.

Air-cooled hood ventilation is a critical component of a grower’s room. However, we understand that establishing a ventilation system isn’t easy.

However, believe us when we say that without a ventilation system, your plants will not thrive.

What are the advantages and functions of an air-cooled hood ventilation system?

For starters, an air-cooled ventilation system will provide the plants with a healthier atmosphere. You’ll need a carbon filter and an inline fan to put this system together. Both the carbon filter and the fan must be placed inside the room/tent. Then, to keep them in line with your reflector, utilize ducting. Carbon filter, fan, and light/reflector should be placed in that order. 

We’ve gone through not just the advantages and functions, but also how to get started. So, if you have a few minutes to spare, let’s have a look at everything together.

Why Should You Opt For An Air-Cooled Hood Ventilation System?

air-cooled-hood-ventilation-system-4-step-easy-installation-5346658 is the source.

We’re going to assume you’re completely unfamiliar with this system. But, hey, we were all fresh to what we can now do, too. So don’t be concerned!

Regardless, let’s get down to business. What is the operation of an air-cooled hood ventilation system?

The carbon filter will first begin to absorb the harmful air in your grow space. The dirty air will then be drawn out of the carbon filter by the inline fan. And force the air through your own reflector. Finally, both the harmful air and the additional heat created by the light will leave your grow space. 

To cut a long tale short, it’s not like other simple ventilation operations. Because this procedure need specialized equipment, such as an inline fan and a carbon filter. 

So, what are your thoughts? Is this ventilation system suitable for your growing environment? 

If that’s the case, let’s get started on the step-by-step approach for swiftly and simply installing this system.

How Do I Make Air-Cooled Hood Ventilation Work?

air-cooled-hood-ventilation-system-4-step-easy-installation-4794420 image

Who wouldn’t want to set up air-cooled hood ventilation for their grow room after knowing all the functions? 

It’s true that only idiots would want to do it. We’re certain, though, that you’d want to try this hybrid method of ventilation in your grow room. As a result, we’ve dedicated this section on how to set up the air-cooled hood ventilation just for you.

As you can see in the diagram, there are four different grow room ventilation options. The first approach, which involves retaining both the carbon filter and the exhaust fan inside, is the most popular.

This is an approach that we strongly recommend. Because this procedure allows you to remove the most hazardous air from your grow space.

So, let’s have a look at how to get this form of ventilation-

Tools Required 

Before you begin the setup method, you must be well prepared. So, before you start doing anything, you’ll need certain particular tools. 

The necessary tools or equipment may be purchased at shops or online. The tools are as follows:

You may now be wondering how to choose the best fan and carbon filter for your grow room or tent. So don’t worry, we’ve got you covered.

Dimensions of the tent/roomFan sizeSize of the filterAirflow
2x2x4/3x3x64 inches4 inches200 CFM
4x4x6/5x5x66 inches6 inches400 CFM

So, as you can see from the chart, we utilized a phrase while discussing airflow. So, what exactly is CFM?

The acronym CFM stands for cubic feet per minute. The minute and cubic feet correspond to the size of your space and how long you want to exchange air. On the box of the filter, you’ll see the CFM number. For instance, if you use a 6 inch fan with a carbon filter, the CFM will be about 400.

Now that you know which tools you’ll need along with the fan and Size of the filters, it’s time to get to work.

Set up an air-cooled grow light reflector (Step 1 of 4)

We devised a simple approach to help the whole setup procedure go more smoothly for you. That is to say, you must first set up the air-cooled grow light reflector. Because the reflector will be in the center, you’ll have a good notion of where the other two will go if you use this approach.

Have you already put up the reflector? That is, without a doubt, a brilliant move! is the source of this image.

Still, because some of you may not have installed the reflector yet, let’s have a little conversation about it. The reflector should now be positioned in the center of the room, directly over your plants. You may use your measuring tape to identify the room’s center.

Then, depending on the size of your space and the strength of the light you’ll be utilizing, you’ll need to purchase a reflector. 

We wanted to give you a rough sense of the size to assist you locate the right reflector.

Room sizethe intensity of the lightDimensions of the reflector
4x4x6MH/HPS 400-600w6 inches
5x5x6 or moreMH/HPS 600-1000w6 to 8 inches

We’ve also included a couple of the finest air cooled reflectors for 1000w light, including the following:

BuyImageProductHow’s it doing so far?
Shop Now!air-cooled-hood-ventilation-system-4-step-easy-installation-6969485air-cooled-hood-ventilation-system-4-step-easy-installation-5369526GLRGW19 19″ Grow Light Reflector by Apollo HorticultureExcellent lighting
Shop Now!1650337563_154_air-cooled-hood-ventilation-system-4-step-easy-installation-51294681650337564_598_air-cooled-hood-ventilation-system-4-step-easy-installation-1736619GLCLTB6 6 Inch Hydroponics Cool Tube Reflector by iPowerHigh-reflectivity

Warning!! HPS lamps are really hot, but they are incredibly efficient; make sure your grow space is well ventilated, and don’t place the light too near to the plant; 30″ from the top of the plant is ideal! Believe me after 20 years of experience!! #Memberville #StonerFam #Memberville #StonerFam

April 20, 2020 — SLY -OIIIIIIIO- (@TheBigBudGarde1)

Finally, connect the hooks to the rope ratchet by attaching them to either side of the reflector. You’ve finished installing the air-cooled hood reflector.

Unbox and Place the Fan (Step 2 of 4) is the source of this image.

Unboxing new things is a lot of fun. However, don’t speed through the unpacking process, since this may cause harm to the fan. You may notice an additional cable attached to your fan after carefully unwrapping it. That is, after all, the controller. 

You don’t have to be upset if you can’t locate a controller. You may simply purchase one for your fan. Here is a list of some of the controllers available, from which you can simply choose the finest one. Please have a look-

The fan should be placed between the air cooled reflector and the carbon filter. If you do this, the fan will suck air from the carbon filter first. Then, together with the surplus heat produced by the grow light for plants, push it out. 

So, you’ve got the reflector set up. Let’s get started with the fan. 

To begin, pass two ropes through the two hooks/loops that you’ve put for your fan. Let’s pass the rope one by one. The next step is to knot the two ends of one rope together. Then repeat with the other rope. 

Place the fan in the area between the ropes at the end. Remember to adjust the ropes to keep the fan in line with the reflector by loosening or tightening them.

Step 3 of 4: Remove the carbon filter from the box and place it in its proper location. is the source of this image.

Let’s move on to unwrapping the carbon filter now that you’ve finished with the fan. When you remove the filter, you’ll see that it has a protective cover. You’ll have to apply the filter to it.

After preparing the carbon filter, set it in front of the fan. It may be hung or placed on the ground, much like the fan. The filter will absorb the hazardous air in the room in any position.

Attach the Filter, Fan, and Reflector in Step 4 of 4 is the source of this image.

So, you’ve set up your grow room with everything you need. All that’s left to do now is connect them. You’ll need ducting and silver aluminum foil tapes for this.

First, connect the silver section of the insulation ducting to the carbon filter by peeling back the silver part of the insulation ducting. After that, secure the ducting with silver tape. Then simply connect and adhere the ducting’s other end to the fan. 

After that, attach another lengthy ducting, such as TerraBloom 10′′ Air Duct, to the other side of the fan. Then point it in the direction of the air-cooled reflector.

Now, start with the ducting on the hood that faces the fan. Attach additional ducting to the air-cooled hood reflector’s opposite side. Finally, connect the ducting to the hole where the air will exit the room. 

And that’s all there is to it! You’ve put in a lot of effort, and we’re proud of you for it. The ventilation process will begin now that everything is in its proper location.

So, now that the ventilation system is in place, what changes or advantages can you expect? Let’s have a look at it in the next part.

The Advantages of Ventilation in a Sealed Grow Room

When it comes to growing plants inside, we all know that proper air quality and the right temperature are critical. What’s more, guess what? Both of these are ensured via air-cooled hood ventilation.

Some unskilled gardeners, on the other hand, may believe that air-cooled ventilation is unnecessary. Which is really ludicrous! Why do we assert this?

Because ventilation via an air cooled hood helps to maintain a balanced climate in your space while also removing contaminants from the air. 

Assume you’ve planted an untreated seed in a climate-controlled indoor grow environment. Do you believe it will develop normally if the temperature isn’t right?

Certainly not! Because the lights are left on, the room will get quite hot. As a result, the atmosphere in the room will be detrimental to the development of a plant. As a result, you’ll need to know how to keep a grow room cool.

A hybrid technique of ventilating your grow area is an air-cooled hood ventilation system. This look will give you with not one, but two advantages!

Is it worthwhile to invest in an air-cooled hood ventilation system?

Yes! You’ll be able to keep your grow area totally enclosed while also saving money on your power cost. As a result, for novices or gardeners on a tight budget, this is a great option to cool and ventilate a grow room.


Is it necessary to have an air-cooled hood ventilation system?

It is, without a doubt. A ventilation system is required to remove heat and exhausted air from your grow room. Your grow room’s atmosphere will be balanced and fresh. This is an ideal location for growing plants.

Is it OK to put the filter and reflector in front of the fan?

Yes, it’s all right. It should not be harmful to you. However, we recommend placing the fan between the reflector and the filter. Because putting the fan after the reflector will cause the fan to suck in more heat, perhaps damaging it.

Is it necessary for me to vent my grow tent outside?

Outside of the growth area, there is no need to vent the grow tent. Ventilation may work in other cases, depending on your arrangement.


That was all we had for you on air cooled hood ventilation. It’s now up to you to provide us with some input. 

Have you figured out how to set up your computer? 

Please let us know in the comments section below. Good luck with your planting!

The “vented grow lights” is an air cooled hood ventilation system that is easy to install. The 4-step installation process includes connecting the ducting, installing the fan, attaching the grill, and finally adding the light.

Related Tags

  • 4×8 grow tent ventilation setup
  • air cooled reflector push or pull
  • grow tent ventilation diagram
  • how to set up air cooled lights
  • air cooled grow light setup

Leave a Comment